A-La-Carte parts for sale:

Here are parts included in my main XO kit.  These prices are available only to those who are buying/have bought one of my XO kits:

Prebuilt, regulated, dual Power Supply	$20
BURR BROWN 2134 op amps	10/$25/; 15/$37
.0047 uF 2% polypro caps	0.50 each ; 20/$8
.068 uF caps	0.75 each ; 20/$14
0.22 uF / 50V ceramic axial (used as op-amp bypass cap in main kit)	20/$2 ; 100/$7
Metal film R kit (340+ total; assorted values)	$15
1 strip of 24 metal film R's	$1.50
Docs only (for non-buyers)	$15

Other parts for sale:

These are parts I have collected, but do not need any longer.  Take advantage, and help me clean out the basement!

CAPACITORS:

0.12 uF / 250V ECQ-UV (mylar) large box cap	20/$2.50 ; 100/$10
0.1 uF / 250V (mylar) small box cap	20/$2.50 ; 100/$10
100 uF / 25V electrolytic	20/$3 ; 250/$27
.068 uF / 200V ugly mylar 10%	90/$4
0.1 uF / 200V 10% surplus Orange Drop 225P (?polypro? - not sure)	20/$4
10 uF / 100V / 10% polypro (STK9309) good for passive XO; or active In/Out DC blockers	$2.50 each; 8/$18
0.015 uF / 5% polystyrene axial, hand matched to better than 1%	20/$8
15,600 uF / 75Vdc GE large metal can electrolytic.  Screw terminals, not young	$4
4,700 uF/ 25V electrolytic axial	10/$5
1800 uF / 16V axial electrolytic	10/$2

POTS:

10K linear large PCB-mount pot (large slotted PCB holes needed)	10/$2
25K linear large PCB-mount pot (large slotted PCB holes needed)	10/$2
50K linear PCB-mount surplus slide pot	16/$2

OTHER:

12.1K Philips Precision 0.1% Resistors	24/$4; 100/$10
1N4002 diodes	20/$2
RCA jacks, plasticblock of 6,gold-plated, screw or PCB mount (can use screws, and hard-wire).	$2 each

SHIPPING:  free if included with active XO kit purchase.  $10 S/H a-la-carte for any QTY of the above.

You can E-mail me at:  johnpomann@yahoo.com

Back to "Active Crossovers for DIY Speaker Builders"
(http://www.snippets.org/filters/crossover.htm)